A probability distribution for depth-limited extreme wave heights in a sea state     

Fernando J. Mndez  Sonia Castanedo 《Coastal Engineering》2007,54(12):878-882

A model for the depth-limited distribution of the highest wave in a sea state is presented. The distribution for the extreme wave height is based on a probability density function (pdf) for depth-limited wave height distribution for individual waves [Méndez, F.J., Losada, I.J., Medina, R. 2004. Transformation model of wave height distribution. Coastal Eng, Vol. 50, 97:115.] and considers the correlation between consecutive waves. The model is validated using field data showing a good representation of the extreme wave heights in the surf zone. Some important statistical wave heights are parameterized obtaining useful expressions that can be used in further calculations.  相似文献   

A simple model to calculate the residual flows in a Spanish ria. Hydrographic consequences in the ria of Vigo     

Ricardo Prego  Fernando Fraga 《Estuarine, Coastal and Shelf Science》1992,34(6)

  相似文献   

Comparison of the biology, dynamics, and secondary production of Talorchestia brito (Amphipoda, Talitridae) in Atlantic (Portugal) and Mediterranean (Tunisia) populations     

S. C. Gonalves  J. C. Marques  M. A. Pardal  M. F. Bouslama  M. El Gtari  F. Charfi-Cheikhrouha 《Estuarine, Coastal and Shelf Science》2003,58(4):901-916

The biology, population dynamics, and production of Talorchestia brito were studied at two sandy beaches located on the Atlantic (Portugal) and on the Mediterranean (Tunisia) coasts, respectively. The seasonal variation in abundance and the overall densities were similar in both populations. Reproduction occurred from February to September in the Atlantic, and from March to early November in the Mediterranean. The sex ratio was male biased in the Atlantic, and female biased in the Mediterranean. Based on data from the Atlantic population, both abundance and the proportion of reproductive females were positively correlated with temperature, while the proportion of juveniles in the population was positively correlated with temperature and sediment moisture. On average, individuals from the Atlantic were larger than the ones from the Mediterranean. Life span was estimated at six to nine months in the Atlantic, and five to eight months in the Mediterranean. Talorchestia brito was shown to be a semiannual species, with iteroparous females producing two broods per year, and exhibited a bivoltine life cycle. The minimum age required for males' and females' sexual differentiation and for female sexual maturation was shorter in the Mediterranean. Growth production (P) was estimated at 0.19 g m⁻² y⁻¹ ash free dry weight (AFDW; 4.3 kJ m⁻² y⁻¹) in the Atlantic population, and 0.217 g m⁻² y⁻¹ AFDW (4.9 kJ m⁻² y⁻¹) in the Mediterranean one. Elimination production (E) was estimated at 0.35 g m⁻² y⁻¹ AFDW (7.9 kJ m⁻² y⁻¹) in the Atlantic, and 0.28 g m⁻² y⁻¹ AFDW (6.3 kJ m⁻² y⁻¹) in the Mediterranean. The average annual biomass ( ) (standing stock) was estimated at 0.032 g m⁻² in the Atlantic beach, and 0.029 g m⁻² in the Mediterranean one, resulting, respectively, in ratios of 5.9 and 7.5 and ratios of 10.8 and 9.6. Like other talitrids, T. brito exhibited geographic variation in morphometrical characteristics, sex ratio, growth rates, life span, and reproduction period, with the Atlantic population presenting a slower life history.  相似文献   

Accuracy assessment of lidar-derived digital elevation models   总被引：2，自引：0，他引：2  

Fernando J.  Aguilar  Jon. P.  Mills 《The Photogrammetric Record》2008,23(122):148-169

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.  相似文献   

The Bayesian detection of discontinuities in a polynomial regression and its application to the cycle-slip problem   总被引：4，自引：1，他引：3  

Maria Clara de Lacy  Mirko Reguzzoni  Fernando Sansò  Giovanna Venuti 《Journal of Geodesy》2008,82(9):527-542

This paper deals with the problem of detecting and correcting cycle-slips in Global Navigation Satellite System (GNSS) phase data by exploiting the Bayesian theory. The method is here applied to undifferenced observations, because repairing cycle-slips already at this stage could be a useful pre-processing tool, especially for a network of permanent GNSS stations. If a dual frequency receiver is available, the cycle-slips can be easily detected by combining two phase observations or phase and range observations from a single satellite to a single receiver. These combinations, expressed in a distance unit form, are completely free from the geometry and depend only on the ionospheric effect, on the electronic biases and on the initial integer ambiguities; since these terms are expected to be smooth in time, at least in a short period, a cycle-slip in one or both the two carriers can be modelled as a discontinuity in a polynomial regression. The proposed method consists in applying the Bayesian theory to compute the marginal posterior distribution of the discontinuity epoch and to detect it as a maximum a posteriori (MAP) in a very accurate way. Concerning the cycle-slip correction, a couple of simultaneous integer slips in the two carriers is chosen by maximazing the conditional posterior distribution of the discontinuity amplitude given the detected epoch. Numerical experiments on simulated and real data show that the discontinuities with an amplitude 2 or 3 times larger than the noise standard deviation are successfully identified. This means that the Bayesian approach is able to detect and correct cycle-slips using undifferenced GNSS observations even if the slip occurs by one cycle. A comparison with the scientific software BERNESE 5.0 confirms the good performance of the proposed method, especially when data sampled at high frequency (e.g. every 1 s or every 5 s) are available.  相似文献   

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon     

Lutz Nasdala  Wolfgang Hofmeister  Nicholas Norberg  James M. Martinson  Fernando Corfu  Wolfgang Dörr  Sandra L. Kamo  Allen K. Kennedy  Andreas Kronz  Peter W. Reiners  Dirk Frei  Jan Kosler  Yusheng Wan  Jens Götze  Tobias Häger  Alfred Kröner  John W. Valley 《Geostandards and Geoanalytical Research》2008,32(3):247-265

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.  相似文献   

Regional retrograde alteration of sub-greenschist facies chlorite to smectite     

Fernando Nieto  Nicolás Velilla  Donald R. Peacor  Miguel Ortega Huertas 《Contributions to Mineralogy and Petrology》1994,115(3):243-252

Dioctahedral smectite is present as a retrograde alteration product of chlorite in Permian-Triassic red slates of the Malaguide Complex in Sierra de Espuña (Betic Cordillera). Mineral assemblages and textures, illite crystallinity indices, and fluid inclusion data indicate sub-greenschist facies conditions that reached at least 180°C in the higher-grade tectonic unit of the Malaguide Complex, preceding formation of smectite. Smectite, having K as the dominant interlayer cation, occurs ubiquitously intercalated with trioctahedral chlorite as thin packets of layers and as individual layers that commonly change to chlorite along layers. Although some chlorite is typically homogeneous and trioctahedral, much chlorite shows signs of alteration and has compositions corresponding to different degrees of smectite contaimination. The incompatibility of metamorphic grade with the occurrence of smectite, the general association of chlorite and smectite, and the textural relations collectively show that dioctahedral smectite is derived through replacement of trioctahedral chlorite. Such replacement occurs on a regional basis and demonstrates that caution must be used in interpreting the occurrence of smectite in pelites as being due to prograde processes. Alteration of trioctahedral chlorite under oxidizing conditions due to introduction of phreatic water after uplift of the Betic Cordillera is proposed as the cause of formation of smectite.  相似文献   

Genetic and chemical relationships between berthierine,chlorite and cordierite in nodules associated to granitic pegmatites of Sierra Albarrana (Iberian Massif,Spain)     

María del Mar Abad-Ortega  Fernando Mieto 《Contributions to Mineralogy and Petrology》1995,120(3-4):327-336

Chlorite and berthierine occur through alteration of cordierite within enclaves of metamorphic rocks transformed by the Sierra Albarrana pegmatites. The coexistence of both phyllosilicates allows us to study their stability relationships and to compare their chemical compositions. Samples showing incipient replacement of cordierite by small cryptocrystalline aggregates can be identified by X-ray diffraction (XRD) as berthierine with small quantities of chlorite. Electron Microprobe (EMP) analyses give mixed compositions of berthierine and cordierite. Samples with extensive replacement of cordierite by aggregates show similar characteristics to those with incipient replacement, but some small crystals are present. The last type of sample shows complete replacement of cordierite by crystals showing optical properties of chlorite and EMPA compositions coherent with chlorite or berthierine. Their XRD pattern corresponds to chlorite and their high resolution transmission electron microscopy (HRTEM) images only show perfect sequences of 14 Å lattice fringes. The cryptocrystalline aggregates of the samples with incipient and extensive replacement present coexistent areas of 14 Å and 7 Å lattice fringes that are intergrown at different levels: (1) large areas (> 1 m) of 7 Å layers; (2) packets of 7 Å layers between 14 Å layer areas, with visible 7 Å to 14 Å lateral changes; (3) random mixed-layers 7 Å/14 Å. Chlorite is the final stable product of alteration of cordierite, with berthierine as an intermediate metastable phase. Energy dispersive X-ray spectrometry microanalyses of 14 Å, 7 Å and (14+7) Å areas show lack of systematic differences in chemical compositions between both phyllosilicates which may be considered as true polymorphs.  相似文献   

The age and source of late Hercynian magmatism in the central Alps: evidence from precise U−Pb ages and initial Hf isotopes   总被引：1，自引：0，他引：1  

Urs Schaltegger  Fernando Corfu 《Contributions to Mineralogy and Petrology》1992,111(3):329-344

This study presents U–Pb ages for zircon, titanite, allanite and epidote, and initial Hf isotopic compositions for zircon of Upper Carboniferous granites, diorites and syenites from the Aar massif, central Alps. The rocks were emplaced during three magmatic pulses after Hercynian collisional tectonics: (A) a shoshonitic-ultrapotassic series at 334±2.5 Ma; (B) scattered diorites and granites at 308–310 Ma; and (C) a high-K cale-alkaline granite batholith at 298±2 Ma. Inheritance of old zircons is negligible among all three groups. The Southern Aar granite, in contrast, is a syn-tectonic, probably ca. 350 Ma old granite that contains large amounts of inherited Precambrian zircons. Alpine metamorphism caused weak lead loss in many analyzed zircon fractions, but left the titanite U–Pb system undisturbed: thorites were almost completely reset by Alpine and recent lead loss. Mineral isochrons defined by titanite, allanite, epidote and apatite yield initial Pb isotopic compositions that are in agreement with the model values of Stacey and Kramers. Initial Hf isotopic compositions range from _Hf=–8 to +3.5. The data follow a trend of increasing _Hf with decreasing age. The _Hf versus element concentration relationships suggest mixing between a mantle and a crustal component. These relationships can be explained in terms of generation of the melts from a subcontinental mantle that had been enriched during subduction events at about 1 Ga and by 300 Ma had developed an isotopic signature distinct from that of MORB-type mantle. Further contamination of the melts occurred during ascent and differentiation in the crust. This late Hercynian magmatism can be related to post-collisional strike-slip tectonics.  相似文献   

The July 1974 solar events: A possible lower limit for microwave activity     

P. Kaufmann  P. Iacomo Jr.  E. H. Koppe  P. Marques Dos Santos  R. E. Schaal  J. R. Blakey 《Solar physics》1975,45(1):189-197

The active region McMath 10433 was the source of several flares and radio outbursts during the early part of July 1974. This region was tracked continuously, for several periods during the month at 22.2 GHz using a telescope with a 4 beam. Comparison with the results obtained simultaneously with a normal 7 GHz solar patrol instrument indicate that there is important burst activity occurring at levels below the detection limit of normal solar patrol instruments. The time-development morphology of these bursts is similar to those normally observed and has enabled the simple events to be re-interpreted. A completely new type of event - the fast absorption - has also been recognized. The correlation of the microwave events with SPA events observed on VLF propagation is also discussed.Spending a sabbatical year at CRAAM, São Paulo, Brazil.  相似文献